近日，我公司接到一客户咨询罗茨丝瓜视频黄色下载出气温度高怎么办?为帮助客户解决这个问题，丝瓜成人网站WWW下载师与技术部上门对该罗茨丝瓜视频黄色下载进行了排查!排查后，分析罗茨丝瓜视频黄色下载输气温度高的原因是因为罗茨丝瓜视频黄色下载属于强制运输气体设备。因为具有强制输送性，所以一定会压缩空气，施加压力减少空气的过程会释放出很多能量。能量就是热量，不同型号的丝瓜视频黄色下载温度上升程度不同，压力就会增大高，温度高，但压缩比的影响，正常但是温度上升了20摄氏度左右，为什么实际上温度上升可能会超过20摄氏度。首先，丝瓜视频黄色下载可能有某些障碍，如机器摩擦，机械摩擦，会释放出一定的热量。如果排气温度进一步升高，严重的可能会超过110度。

　　其次，管道堵塞、管道堵塞导致超压。增加热量释放，超压是更危险的故障,丝瓜视频黄色下载的电机容易烧坏,也是罗茨丝瓜视频黄色下载温度上升的影响因素。

　　**，进气温度的影响，普通丝瓜视频黄色下载进气温度度不能超过40摄氏度，运输媒体是空气在这种情况下，如果冷却不顺畅，可能会有进气温度超过40摄氏度，丝瓜视频黄色下载口温度就会升高。过高的温度会影响丝瓜视频黄色下载的备件。例如：密封、轴承、水箱润滑油温度等，这些都可能导致丝瓜视频黄色下载故障。所以在每天的巡逻工作中，丝瓜视频黄色下载的温度也是测试内容，每天丝瓜视频黄色下载的温度监控，保证丝瓜视频黄色下载的温度不超过一定范围，所这样就可以长期使用罗茨丝瓜视频黄色下载。

　　1.强制输送气体

　　罗茨丝瓜视频黄色下载在输送气体的时候，需要对丝瓜视频黄色下载进行强制压缩，丝瓜视频黄色下载的选型时，有个压力参数，比如39Kpa，罗茨丝瓜视频黄色下载在压缩空气时，可以承受的**压力是39Kpa，当前方管道的压力达到39Kpa时，丝瓜视频黄色下载可以克服压力正常运行。强制压缩空气运行，必然会产生热量，所以，罗茨丝瓜视频黄色下载输出的气体是带有一定温度的。

　　2.进口温度

　　输送清洁空气，进口温度一般控制在40摄氏度以下，超过40摄氏度，对于普通丝瓜视频黄色下载的各个方面的性能要求较高，很难实现良好的输送效果。特别是夏季高温天气，本身空气进入丝瓜视频黄色下载管道时便带有一定的温度，经过压缩后，温度会更高一些!

　　3.正常丝瓜视频黄色下载的进口温度

　　如果丝瓜视频在线看输送清洁空气，出口温度尽量保持在100摄氏度以下，超过100摄氏度需要对油箱进行水冷，如果丝瓜视频在线看使用的丝瓜视频黄色下载，压力很高，需要采用双级串联型丝瓜视频黄色下载，并需要加装冷凝器来对空气进行冷却。这样就可以解决罗茨丝瓜视频黄色下载输出热风的问题了!

　　4.高温对丝瓜视频黄色下载的影响

　　高温对丝瓜视频黄色下载的油箱、密封件、轴承等，都会产生影响，严重可能导致丝瓜视频黄色下载无法工作，在每天检查的工作内容中，丝瓜视频黄色下载机体温度、轴承温度、油箱温度，都需要进行检查，并做好每天的记录工作。根据丝瓜视频黄色下载工作强度，适当提前进行相应配件的更换!

　　相信大家看完以上内容以后，应该也对【罗茨丝瓜视频黄色下载为什么出来的是热风】有所了解了，希望会对大家有所帮助吧。至于到了夏天机子排出的热风会更高一点，这个根进气的温度有直接的关系，夏天空气温度比较高，所以排出的空气也温度也就高了。所以到了夏天，用户可以通过物理降温，给设备添加一个外置的风扇或冷凝器进行降温。或者更新设备时选购丝瓜视频在线看厂生产销售的水冷式罗茨鼓丝瓜视频黄色下载也可以!

　　Recently, our company received a customer's inquiry about how to deal with the high outlet temperature of Roots blower? In order to help the customer solve this problem, the engineer and the technology department came to the door to check the roots blower! After troubleshooting, it was analyzed that the reason for the high gas transmission temperature of Roots blower was that roots blower was a mandatory gas transportation equipment. Because of its forced delivery, it will compress the air, and the process of applying pressure to reduce the air will release a lot of energy. Energy is heat. Different types of fans have different degrees of temperature rise, so the pressure will increase and the temperature will be high. But the compression ratio is normal, but the temperature has increased by about 20 degrees Celsius. Why in fact the temperature rise may exceed 20 degrees Celsius. First of all, the fan may have some obstacles, such as machine friction, which will release a certain amount of heat. If the exhaust temperature rises further, it may seriously exceed 110 degrees.

　　Secondly, pipeline blockage and pipeline blockage lead to overpressure. Increase heat release, overpressure is a more dangerous fault, and the fan motor is easy to burn out, which is also the influencing factor of the temperature rise of Roots fan.

　　Finally, due to the influence of inlet air temperature, the inlet air temperature of ordinary fans cannot exceed 40 degrees Celsius, and the transportation medium is air. In this case, if the cooling is not smooth, there may be inlet air temperature exceeding 40 degrees Celsius, and the fan inlet temperature will rise. Excessive temperature will affect the spare parts of the fan. For example, seal, bearing, lubricating oil temperature of water tank, etc., which may lead to fan failure. Therefore, in the daily patrol work, the temperature of the fan is also the test content. The temperature of the fan is monitored every day to ensure that the temperature of the fan does not exceed a certain range, so the Roots fan can be used for a long time.

　　1. Forced delivery of gas

　　When roots blower is conveying gas, it needs to carry out forced compression on the blower. When selecting the blower, there is a pressure parameter, such as 39kpa. When roots blower is compressing air, the maximum pressure it can bear is 39kpa. When the pressure of the front pipe reaches 39kpa, the blower can overcome the pressure and operate normally. Forced compressed air operation will inevitably generate heat, so the gas output by roots blower has a certain temperature.

　　2. Inlet temperature

　　When transporting clean air, the inlet temperature is generally controlled below 40 degrees Celsius and above 40 degrees Celsius, which requires high performance in all aspects of ordinary fans, so it is difficult to achieve good transmission effect. Especially in high temperature weather in summer, the air itself will have a certain temperature when it enters the fan pipe. After compression, the temperature will be higher!

　　3. Inlet temperature of normal fan

　　If we deliver clean air, the outlet temperature should be kept below 100 ℃. If it exceeds 100 ℃, the oil tank needs to be cooled. If the fan we use has a high pressure, we need to use a two-stage series fan and install a condenser to cool the air. In this way, the problem of hot air output from roots blower can be solved!

　　4. Influence of high temperature on fan

　　High temperature will have an impact on the oil tank, seals, bearings, etc. of the fan, which may cause the fan to fail to work seriously. In the work content of daily inspection, the fan body temperature, bearing temperature and oil tank temperature need to be checked and recorded every day. According to the working intensity of the fan, replace the corresponding accessories appropriately in advance!

　　I believe that after reading the above content, you should also understand [why the roots blower comes out with hot air], and I hope it will be helpful to you. As for the hot air discharged by the machine in summer, it will be a little higher. This root has a direct relationship with the temperature of intake air. In summer, the air temperature is relatively high, so the temperature of the discharged air is also high. So in summer, users can add an external fan or condenser to the equipment to cool down through physical cooling. Or when updating the equipment, you can choose the water-cooled roots blower produced and sold by our factory!